Anti-Chlor

General
Anti-Chlor is a specialised product designed to neutralise active chlorine on treated surfaces. It reliably reduces chlorine residues and stops their chemical action. This prevents damage to materials and unwanted reactions following cleaning.

Application areas
For the after-treatment of surfaces following the use of chlorine-based cleaning and disinfectant products, particularly after use with stone-clean F or germex C.
Suitable for mineral substrates, natural and artificial stone, and other water-resistant surfaces.

Dosage
Depending on the degree of soiling and the amount of chlorine used:
• The product can be used undiluted or diluted and neutralises the equivalent amount of germex C or stone-clean F 20% solution. To neutralise residual chlorine, we recommend using approximately 20% of this equivalent amount.

Instructions for use
• apply the solution evenly to the previously treated, still damp surface 
• leave to work for a short time (approx. 5 - 10 minutes) 
• then rinse thoroughly with clean water 
• do not allow to dry 
• test on an inconspicuous area before use

Special advice
• use only on surfaces contaminated with chlorine
• do not mix with other chemicals
• wear personal protective equipment (gloves, safety goggles if necessary)
• ensure good ventilation
The manufacturer declines all responsibility for damages from improper product use.

Technical data
Storage stability: at least 24 months in the unopened original container
Storage: Store in a cool, dry place away from frost / protect from direct sunlight
pH value concentrated: 12 / 1% solution: 7 - 8
Ingredients: Reducing agents for chlorine neutralisation, water, additives

Article no. refers to the individual container. (Bottle, canister, bucket, can, barrel, cubitainer)