strip

Highly active, concentrated stripper for the removal of acrylic dispersion and dry-bright emulsion layers. Removes effectively all types of soiling.

Application areas

For all washable floor coverings like plastic, PVC, linoleum, hard concrete, terracotta tiles, clinker bricks, natural and synthetic stone, epoxy resin, rubber, Colovinyl, xylolite and asphalt.

Dosage

Add 0.5 – 2 l to 10 l lukewarm water (5 - 20%).

For general cleaning and the removal of heavy soiling:
Add 2 – 5 dl to 10 l water (2 - 5%).

Instructions for use

Apply solution.
Allow to act for approximately 10 minutes.
Scrub and remove soiled solution with a wet vacuum cleaner or mop.

Product consumption

10 l solution for 30 – 50 m².

Special advice

Immediately remove any drops or splashes from painted / lacquered surfaces and skirting (baseboards) with water.
Rinse with clean water if the floor is coated after the treatment.
Product does not change colours of linoleum floors.
The manufacturer declines all responsibility for damages from improper product use.

Technical data

Storage stability: at least 2 years
pH value (concentrated): 11
pH value (1% solution): 8.5
Ingredients: surfactants, amines, solvents, perfume, preservative, water

 Article no. refers to the individual container. (Bottle, canister, bucket, can, barrel, cubitainer)