turbo-strip

Dissolves old wax and plastic coats completely and extremely fast. Highly effective, concentrated stripper for the removal of dispersion and dry-bright emulsion coats. Removes also other types of soiling. Alkaline.

Application areas

For washable floor coverings like plastic, PVC, hard concrete, terracotta tiles, clinker bricks, natural and synthetic stone, rubber and xylolite.

Dosage

Add 1 – 2 l to 8 – 9 l water (10 - 20%).

For the removal of heavy soiling: Add 0.5 – 1 dl to 9 l water (5 - 10%).

Instructions for use

Apply solution.
Allow to act for 2 – 5 minutes.
Scrub and remove soiled solution with a wet vacuum cleaner or mop.

Product consumption

10 l solution for 30 – 50 m².

Special advice

Immediately remove any drops or splashes from painted / lacquered surfaces and skirting (baseboards) with water.
Rinse floor with clean water if it is coated after the treatment.
Not suitable for linoleum (discoloration) and asphalt.
Note instructions on the EU safety data sheet.
The manufacturer declines all responsibility for damages from improper product use.

Technical data

Storage stability: at least 2 years
Storage: -
pH value (concentrated): 12.5
pH value (10% solution): 11.5
Ingredients: anionic and non-ionic surfactants, water-soluble sol-vents, hydrotropes, NTA, phosphates, perfumes, water