• wood-cal-cir


Hot wax for unsealed wooden floors. Special hot wax applicator required.

wood-cal-cir contains hard waxes that will nurture your wooden floor and give it a hard-wearing protective wax coating and durable sheen. The high wax content ensures that treated surfaces are optimally protected.


For waxed, oiled and untreated wooden flooring.


Apply in undiluted form using a hot wax applicator.


5 - 15 g per m2 and coat.

Instructions for use

The floor should be clean and dry prior to application. First clean any heavily soiled areas using wood-cir-ex solvent-based cleaner.
Half-fill the wax applicator and warm the wax until it is fully molten (10 - 15 minutes)
Apply the fluid hot wax in narrow strips to the floor and work in evenly using the fine wax brush.

Important information

Polish as soon as the wax film has sufficiently hardened. It is advisable to buff the surface as soon as possible as the wax will not polish if it is left to dry for too long.
Inflammable; keep away from sources of ignition.
The manufacturer accepts no liability for any damage resulting from the inappropriate use of this product.

Technical information

Shelf life: at least 2 years
Storage: -
Composition: Floor care waxes dissolved in hydrocarbons

Specific References