• optima


Thermoplastic dispersion with polyurethane. For PVC, linoleum and stone floors. High-gloss. Slip-resistant. Brilliant shine and optimum durability thanks to high-speed method. Ideally suited for use in combination with prima.

Polymeric dispersion for the coating of smooth PVC or linoleum floors. Hardly streak-sensitive and easily repairable. Still perfect even when painted over. Fast drying, shining and tread-resistant. Especially high shine is achieved with the high-speed method. For an application on stone or damaged linoleum, a first treatment with prima is recommended.

Application areas

For all smooth floor coverings made of plastic, PVC, linoleum or Colovinyl.


Apply undiluted.

Instructions for use

Pour the undiluted product onto the clean floor and apply with a polish applicator evenly in lanes.
Apply 1 - 2 coats, depending on the absorbency of the floor.
Allow the first coat to dry.

Product consumption

30 - 50 g per m2 and coat.

Special advice

Rinse polish applicator with water immediately after use.
Treat dry coverings only.
Protect from frost.
Test compatibility of the product in an inconspicuous place before applying on large surfaces (over 50 m2).
The manufacturer declines all responsibility for damages from improper product use.

Technical data

Storage stability: at least 2 years
Storage: do not store below 0° C
pH value (concentrated): 8.5
Ingredients: water-soluble, organic solvents, preservative, perfume


Art. No.


Carton à

Pallet à


10l – Canister


60 Canister

 Article no. refers to the individual container. (Bottle, canister, bucket, can, barrel, cubitainer)


Specific References