Polydur
A care emulsion without metallic salts for environmentally compatible basic treatment of all waterproof synthetic, PVC, linoleum, natural stone or artificial stone floor coverings. Produces a glossy, slip-resistant, polishable protective film.
General information
Metal salt-free care emulsion for the basic treatment of all waterproof, hard and elastic and elastic floor coverings made of plastic, PVC, linoleum, Colovinyl, rubber and natural and artificial stone.
Provides a glossy, slip-resistant and polishable protective film.
Area of application
For all waterproof, hard and elastic floor coverings made of plastic, PVC, linoleum, Colovinyl, rubber and natural and artificial stone.
Dosage
apply undiluted
Instructions for application
Preparation: Clean the floor thoroughly before application.
Application: Pour undiluted onto a thoroughly cleaned, clean floor and apply evenly in strips using a coater. Apply 2-3 coats, depending on the absorbency of the floor. Allow the first coat to dry sufficiently.
Special instructions
Do not use on coverings with factory-applied wear layers, unsealed cork and wooden floors.
Wash out the applicator with water immediately after use.
Only treat wax-free floor coverings.
Protect from frost.
The manufacturer accepts no liability for damage resulting from improper use.
Technical data
Shelf life: at least 2 years
Store: not below 0°C
pH value concentrated: 8
Ingredients: Waxes, plastic dispersions, non-ionic surfactants, fragrances, preservatives, water
|
Art. No. |
Packaging |
Carton à |
Pallet à |
|
14553.00110 |
10l – Canister |
|
60 Canister |
Article no. refers to the individual container. (Bottle, canister, bucket, can, barrel, cubitainer)
Specific References
A care emulsion without metallic salts for environmentally compatible basic treatment of all waterproof synthetic, PVC, linoleum, natural stone or artificial stone floor coverings. Produces a glossy, slip-resistant, polishable protective film.