Polydur star

General information
Metal salt-free care dispersion for the basic treatment of all waterproof, hard and elastic floor coverings made of plastic, PVC, linoleum, rubber and natural and artificial stone.
Provides a glossy protective film.
Resistant and tread-proof.

Area of application
all waterproof, hard and elastic floor coverings made of plastic, PVC, linoleum, rubber and natural and artificial stone

Dosage
apply in concentrated form

Instructions for application
Preparation: Clean the floor thoroughly before application.
Application: Pour undiluted onto a thoroughly cleaned, clean floor and spread evenly in apply evenly in strips using a brush. Apply 2 - 3 coats, depending on the absorbency of the floor. Allow the first coat to dry sufficiently.

Consumption
20 - 40g per m² and coat

Special instructions
Do not use on coverings with factory-applied wear layers, unsealed cork and wooden floors.
Wash out the applicator with water immediately after use.
Only treat wax-free floor coverings. Protect from frost.
The manufacturer accepts no liability for damage resulting from improper use.

Technical data
Shelf life: at least 2 years
Store: not below 0°C
pH value concentrated: 8
Ingredients: Waxes, plastic dispersions, non-ionic surfactants, fragrances, preservatives, water

Article no. refers to the individual container. (Bottle, canister, bucket, can, barrel, cubitainer)