FLOORPOL

Dry-bright emulsion with a high wax content. Easy to apply. The dry-bright protective film is easily polishable, waterproof and resistant to treads and to weak detergents. Prevents the floor from premature wear and tear and from black heel marks. Facilitates damp mopping.

Application areas

For all smooth floor coverings made of plastics, PVC, linoleum, Colovinyl, rubber, asphalt, terracotta slabs, clinker bricks and xylolite.

Dosage

Apply concentrated, or add 2 - 4 dl to 10 l water (2 - 4%) for use as maintenance wipe.

Instructions for use

Preparation: Strip floor.
Application: Pour the undiluted product onto the stripped, clean floor. Apply with a polish applicator regularly in lanes. Apply 1 - 2 coats, depending on absorbency of the floor. Allow the first coat to dry. Apply the se-cond coat after 30 - 60 minutes, depending on room temperature and humidity.

Maintenance wipe: Apply with mop or cloth.

Product consumption

20 - 40 g per m² and per coat

Special advice

Wash the polish applicator immediately after use.
Protect product from frost.
The manufacturer declines all responsibility for damages from improper product use.

Technical data

Storage stability: at least 2 years
Storage: do not store below 0°C
pH value concentrated: 5
Ingredients: waxes, plastics, anionic and non-ionic surfactants, perfume, preservative, water 

Article no. refers to the individual container. (Bottle, canister, bucket, can, barrel, cubitainer)