LINOPOL

Floor stripper for removing acrylic dispersions and dry-bright emulsions. Removes all sorts of soiling.

Application areas

Particularly for linoleum floors but also for floor coverings made of plastic, PVC, epoxy resin, rubber, Colovinyl and xylolite.

Dosage

0.5 - 2 litres for 10 litres of lukewarm water (5 - 20%)

For general cleaning and for removing heavy soiling:
2 - 5 dl to 10 litres of water (2 - 5%)

Instructions for use

Apply the solution.
Allow to act for approximately 10 minutes.
Scrub.
Remove the soiled solution with a wet vacuum cleaner or mop.

Product consumption

10 litres of the solution for 30 - 50 m²

Special advice

Wash splashes on painted or lacquered surfaces and skirting boards abundantly with water immediately.
Rinse with clear water when the floor is to be coated afterwards.
The product does not discolour linoleum coverings.
The manufacturer declines all responsebility for damages from improper product use.

Technical data

Storage stability: at least 2 years
pH value concentrated: 10.5 / 1% solution: 8
Ingredients: surfactants, perfume, water-soluble organic solvents, water, alcohol 

Article no. refers to the individual container. (Bottle, canister, bucket, can, barrel, cubitainer)