cera-clean

Intensive, deep-cleaning alkaline agent specially designed for microporous surfaces, e.g. porcelain stoneware tiles. Spontaneously loosens stubborn dirt, e.g. in car workshops and in the machine industry. For all alkaline-resistant surfaces and hard floor surfaces such as porcelain stoneware tiles, glazed and unglazed bricks, safety tiles, epoxy resin floors etc.

Applications

Especially suited for cleaning modern, microporous porcelain stoneware floors, but also all washable, alkaline-resistant hard floor surfaces such as hardened concrete, clay tiles, glazed and unglazed bricks, natural and artificial stone.

Dosage

Routine cleaning: use 50 - 100 ml in 10 litres of water (0.5 - 1%).
Machine cleaning: use 100 - 200 ml in 10 litres of water (1 - 2%).
Intensive cleaning: use 1 - 2 litres in 10 litres of water (10 - 20%).
Stain remover: use in undiluted form directly on stains

Instructions for use

Routine cleaning: wet wipe with mop or microfibre cloth.
Machine cleaning: apply, scrub, vacuum (direct method).
Intensive cleaning: apply, allow to soak in (5 - 10 minutes), scrub, vacuum (indirect method).
Stain remover: Apply product in concentrated form and let dry, then rinse out with plenty of water.

Consumption

10 litre solution for 50 to 80 m².

Important information

The manufacturer accepts no liability for any damage resulting from the inappropriate use of this product.

Technical information

Shelf life: at least 2 years
pH value (concentrate): 13
pH value (solutions): 10 - 11
Ingredients: surfactants, solvents, alkaline salts, water

Article no. refers to the individual container. (Bottle, canister, bucket, can, barrel, cubitainer)