acifoam forte

General information

Foam cleaner for sanitary facilities and the food industry.

Highly concentrated, acidic product with corrosion protection.

Reliably removes limescale and soiling of all kinds.

Used with foam generators (foam cannons with pressurised or injector system). 

used. The foam stability enables an optimum contact time of the product 

product (also on vertical surfaces and ceilings).

Area of application

On all acid-resistant, washable floor and wall coverings such as plastic (PVC), Novilon, Colovinyl, tiles, epoxy resin, clay tiles, clinker, rubber, as well as on chrome and chrome steel.

In sanitary and shower areas of indoor and outdoor swimming pools, bathrooms and toilets. 

and toilets. In food processing businesses (butchers, dairies, catering) and commercial kitchens.

Dosage

2 - 10% (depending on the foam generator used and the desired foam stability).

Instructions for processing

Foam the product onto surfaces with the foam generator until a closed foam layer is obtained.

Allow to act until the foam has largely disintegrated. Rinse with tap water.

Pre-wet non-acid-resistant joint material with water.

Special instructions

Wash cleaned objects that come into direct contact with food thoroughly with tap water before use.

In case of skin or eye contact, rinse with plenty of water.

Wear respiratory protection when using pressurised atomisers (formation of aerosols).

Do not use on limestone (slate, travertine, Solnhofer, marble) and artificial stone (terrazzo).

Check glazed tiles for acid resistance in an inconspicuous place. The manufacturer accepts no liability for damage resulting from improper use.

Technical data

Storage stability: at least 2 years

pH value: concentrated: 1.5 / 1% solution: 2.5

Ingredients: Non-ionic surfactants, inorganic acid, corrosion protection, fragrances, colourants, water

 Article no. refers to the individual container. (Bottle, canister, bucket, can, barrel, cubitainer)