Lino-Restorer

General information
Mild bleaching agent for restoring discoloured, untreated linoleum.

Area of application
on linoleum floors

Dosage
Use the product pure or diluted 1:1.

Instructions for use
Apply the product pure or diluted 1:1 to wet linoleum flooring. The floor covering must be free of coating agents, prior basic cleaning is recommended. Apply the product undiluted or diluted 1:1 to the wet floor covering with a mop, cloth, sponge, brush or washing machine and work with a mild mechanical action (red pad). Leave on for 5 - 10 minutes and rinse thoroughly with plenty of water. Repeat the application if the desired appearance has not yet been achieved. After treatment and once the desired appearance has been achieved, the floor covering must be protected again with a sealer.

Special instructions
The product has a bleaching effect and may lighten the floor covering more than the original colour. Carry out preliminary tests on an inconspicuous area beforehand. Apply evenly over the entire surface to avoid colour differences. The product must never be mixed with acidic cleaners or acids.
The manufacturer accepts no liability for damage resulting from improper use.

Technical data
Shelf life: at least 1 year depending on storage conditions
Store: in a cool, dark place and only in the original container
pH value concentrated: 4 / 20% solution: 4.5
Ingredients: Active oxygen, stabilisers

Article no. refers to the individual container. (Bottle, canister, bucket, can, barrel, cubitainer)