cirex

Cleaner for solvent-resistant floor coverings. Removes wax, oil and grease layers. Replaces the scouring of unsealed parquet floors. Floors are lighter but not exhausted or roughened. Does not damage sealed parquet.

Application areas

For floor coverings made of wood, parquet, linoleum, cork, cork linoleum and xylolite.

Dosage

Use undiluted.

Instructions for use

Large surfaces: Treat floor with a single disc machine equipped with a suitable pad (a fine pad for sealed parquet). Apply product directly out of the water tank, scrub surface. Remove dissolved dirt with a mop or cloth while the surface is still wet. Wipe with a clean cloth. Allow to dry. Use a pad to remove soiling from less soiled floors.

Small surfaces: Manual application. Pour product directly from the can onto a small surface, then rub with a hand pad or mop. Remove dissolved dirt with a mop or cloth while the surface is still wet. Wipe with a clean cloth. Allow to dry.

Product consumption

1 l solution for 10 – 20 m²

Special advice

Not suitable for asphalt, rubber and other solvent-sensitive floors.
Flammable. Do not smoke.
Ensure good room ventilation.
Store clothes soaked with cirex or wax in a metal container or burn under constant surveillance.
The manufacturer declines all responsibility for damages from improper product use.

Technical data

Storage stability: at least 2 years
Storage: flammable
Ingredients: organic solvents 

 Article no. refers to the individual container. (Bottle, canister, bucket, can, barrel, cubitainer)