ecofloor polymer conc.

General information
Wipe care with self-shine and good polishability. The optimised, water-soluble polymers produce a self-shine and are easy to polish. No layer build-up and no edge formation. Fulfils DIN 18 032-2, section 7.5 and is suitable for sports floor coverings in accordance with DIN EN 14904. For all waterproof floor coverings; coated or, in particular, non-coated. Low-foaming and suitable for automatic machines. Has an antistatic effect.

Area of application
For all washable floor coverings such as plastic, PVC, linoleum, natural and artificial stone, rubber and epoxy resin.
ecofloor polymer conc. can be used in a variety of ways:
- as a high-yield product for wet mopping
- for thorough cleaning
- for use in automatic cleaning machines

Dosage
Wet mopping: 10 - 20ml to 8 litres of water (0.125 - 0.25%). Spread the solution on the floor with a on the floor, leave to act for a short time, absorb the dirty water and allow to dry. Polishing makes the protective film high-gloss and tread-resistant.
Cleaning machine: 10 - 20ml to 8 litres of water (0.125 - 0.25%)
Spray cleaners: use diluted 1:4

Special instructions
Not suitable for unsealed wood and cork floors.
The manufacturer accepts no liability for damage resulting from improper use. 

Technical data
Shelf life: at least 2 years
pH value concentrated: 9.0 / 1% solution: 7.5
Ingredients: Non-ionic and anionic surfactants, care substances, preservatives, colourants, fragrances, water

Article no. refers to the individual container. (Bottle, canister, bucket, can, barrel, cubitainer)