HS-17

HS-17 Highspeed-Spray-Emulsion has been developed especially for the machine cleaning and maintenance of floors with the high-speed and super-high-speed method. Removes heel marks and water-soluble soiling at once. The product is very economical in the application. Perfectly suitable for high traffic areas thanks to its short drying time. The floor’s life is considerably prolonged. Polishing with the high-speed-machine provides a brilliant shine.

Dosage

apply undiluted

Instructions for use

Preparation: Damp mop the floor.

Application: Pour the product into the clean spray can of a single disc machine. Equip the machine with a suitable pad (e.g. natural). Spray the product regularly onto the surface. Move the machine in circular motions until the floor is dry. If the protective film is damaged, move more slowly. If the pad begins to smear, use the clean reverse side or replace it.

Product consumption

1 l concentrate for 100 - 300 m²

Special advice

If the film is heavily soiled, cleaning with HS-17 Highspeed-Spray-Emulsion delays the basic cleaning.
The product bases on a hard, durable dispersion.
Do not allow the pad to dry, but soak it in a detergent solution immediately after use.
Rinse thoroughly with lukewarm water.
The manufacturer declines all responsibility for damages from improper product use.

Technical data

Storage stability: at least 2 years
Storage : store in the original container only / store above 5°C
pH value concentrated: 8.5
Ingredients: maintenance agents, preservative 

Article no. refers to the individual container. (Bottle, canister, bucket, can, barrel, cubitainer)