litol
Special oil for treating screed floors and unglazed clay and clinker tiles. Dries completely. Also suitable for end-grain wood.
Litol is a mixture of drying special oils and solvents. Unlike mineral oils, it dries completely, and it is harder and less soil-sensitive than custommary floor oils, but it remains elastic. Dust does not stick to the floor anymore.
Application areas
For xylolite floors, clinker bricks and terracotta tiles.
Dosage
apply undiluted
Instructions for use
Clean floors thoroughly before applying the product.
Floors have to be very dry, so allow to dry for 2 days after wet cleaning.
Spread product on edges and corners first.
For a lane of 1 m in width, pour the needed amount of the product onto the entire width of the surface area and spread regularly with a sponge clamp.
Spread the applied product also in the opposite direction for a regular application.
Repeat the application on very absorbent floors after approximately 45 - 60 minutes.
Remove oil which has not penetrated into the floor with a dry sponge clamp after 1 - 2 hours.
Buff with a cloth or a machine equipped with a white pad.
Allow non-absorbent floors to dry for 2 days.
Special advice
The product is flammable.
Treat dry floors only.
Do not leave surplus product on the floor.
Soak applicators in solvent cleaner when not in use.
Wrap sponges into plastic foil.
Professional knowledge is necessary for proper use.
The manufacturer declines all responsibility for damages from improper product use.
Technical data
Storage stability: at least 2 years
Storage: store in the original container
pH value: -
Ingredients: maintenance oils, organic solvents
Art. No. |
Packaging |
Carton à |
Pallet à |
14505.00106 |
1l – Can |
12 x 1l |
40 Cartons |
14505.00118 |
10l – Canister |
|
45 Canister |
Article no. refers to the individual container. (Bottle, canister, bucket, can, barrel, cubitainer)
Specific References