acifoam

Foaming cleanser for sanitary facilities and the food industry. Highly concentrated acid product. Removes limestone and dirt. Applicable with foam generator (foam cannon with pressure or injection unit). The foam stability increases the contact time of the product and allows cleaning even on vertical surfaces and ceilings.

Application areas

For all acid-resistant, washable floor and wall coverings like plastic (PVC), novilon, Colovinyl, tiles, epoxy resin, terracotta slabs, clinker bricks, rubber, chrome and chrome steel.
For sanitary facilities, indoor and outdoor swimming pools, bathrooms and toilets.
For the food processing industry (butcher’s shops, dairies, catering trade) and commercial kitchens.

Dosage

2 - 10%, depending on foam generator and desired foam stability.

Instructions for use

Apply foam with a foam generator; the entire surface has to be covered with foam.
Allow to act until the foam has decomposed for the most part.
Rinse with tap water.
Moisten acid-sensitive joint material with water before applying foam.

Special advice

Wash objects which come into contact with food with plenty of tap water before reusing them.
Do not apply to limestone (slate, travertine, Solnhofer, marble) and synthetic stone (terrazzo).
In case of skin or eye contact, rinse with plenty of water.
In case of spray application, wear a breathing mask (formation of aerosols).
Test the acid-resistance of glazed slabs in an inconspicuous place before use.
The manufacturer declines all responsibility for damages from improper product use.

Technical data

Storage stability: at least 2 years
pH value (concentrated): 1.5
pH value (1% solution): 2.5
Ingredients: non-ionic surfactants, inorganic acid

 Article no. refers to the individual container. (Bottle, canister, bucket, can, barrel, cubitainer)

Article no. refers to the individual container. (Bottle, canister, bucket, can, barrel, cubitainer)