graffiti-protect W33

State-of-the-art aqueous impregnating agent. Gives surfaces hydrophobic and oleophobic properties.

Applications
all porous (absorbent) subsurfaces

Dosage
use undiluted

Instructions for use
Subsurface preparation: the surface to be treated should be clean and dry. Loose particles of dirt clinging to the surface must be removed.
The agent should be liberally applied, by spraying, e.g. via an airless device, HVLP unit, or by using scrubbers and paint brushes. The amount of graffiti-protect W33 that should be applied depends upon the subsurface. Usually about 100 - 200ml per m² is required.
Surface and air temperature should be between +5°C and +40°C during application.
Drying: graffiti-protect W33 achieves full effectiveness when drying is completely finished (approx. 4 hours at +20°C).
Tool cleaning: clean tools with water.

Important information
It is recommended the product always be applied to sample surfaces. This will enable you to check product consumption for your specific surface.
Always prepare a sample surface and have it evaluated by the client party responsible (shine may become darker).
The manufacturer accepts no liability for any damage resulting from the inappropriate use of this product.

Technical information
Shelf life: 2 years
pH value concentrate: 7
Ingredients: impregnating agents 

 Article no. refers to the individual container. (Bottle, canister, bucket, can, barrel, cubitainer)