glass-polish
For polishing corroded (blind) glass panes. This is a common problem caused by cement solutions, among other things.
Powder for the cleaning and polishing of etched and matt glass surfaces. The ingredients chemically change the uppermost glass structures, which become polishable.
Application areas
For glass panes which have become matt and clouded through cement water and atmospheric pollution.
Dosage
Apply undiluted.
Instructions for use
Put some powder on a moist cloth or cork pad.
Polish matt surfaces until they are transparent.
The procedure probably has to be repeated several times.
Wipe surface with a moist cloth.
The product must not be allowed to act on smooth, transparent glass surfaces for too long a time and without being polished; the surfaces can be corroded and damaged (mat, dull areas).
Damaged areas can be rubbed out, depending on the depth of the damages.
Product consumption
Approximately 5 - 10 g per 100 cm2.
Special advice
Do not use the product for tempered (steamed or anti-reflective) glass surfaces.
Wear gloves.
The manufacturer declines all responsibility for damages from improper product use.
Technical data
Storage stability: at least 2 years
Storage: store dry
Ingredients: inorganic salts, inorganic acids, polish
Art. No. |
Packaging |
Carton à |
Pallet à |
17572.00199 |
1kg – Bucket |
8 x 1kg |
40 Cartons |
17572.00134 |
5kg – Bucket |
1 x 5kg |
52 Cartons |
Article no. refers to the individual container. (Bottle, canister, bucket, can, barrel, cubitainer)
Specific References