tapi-wash
Highly effective low foam cleaner for spray extraction. With a fresh scent.
Low-foaming carpet cleanser with good wetting properties. Dissolves and emulsifies all types of soiling. Decreases foam development on carpets which contain shampoo residues. The use of an antifoam product is often not necessary anymore. Appropriate for the wet spot removal method when used undiluted.
Application areas
For all water-resistant carpets and upholstery made of wool and synthetic fibre.
Dosage
Add 1 – 4 dl to 10 l lukewarm water (1 - 4%).
Pre-spray heavily soiled areas with a 10 – 20% solution (add 1 – 2 l to 10 l water).
Instructions for use
Thoroughly vacuum carpet or upholstery.
Remove spots.
Pre-spray heavily soiled areas with a spray extraction machine (suction motor turned off) or hand pump.
Allow to act for 10 – 15 minutes. Then spray extract.
Warm water increases the cleaning effectiveness.
Raise carpet pile with a pile brush while the carpet is still damp.
Product consumption
1 l concentrate for 30 – 50 m2 depending on carpet / upholstery type and soiling.
Special advice
Test the colourfastness of carpet and upholstery in an inconspicuous place before use.
Do not exceed a water temperature of 40°C on wool.
Rinse with clear water when using more highly concentrated solutions.
Exercise caution when cleaning carpet / upholstery with jute backing (shrinkage, bleeding).
Wrap furniture feet with plastic or aluminium foil to protect from rust or varnish / finish damage.
The manufacturer declines all responsibility for damages from improper product use.
Technical data
Storage stability: at least 2 years
pH value (concentrated): 8.5
pH Value (1% solution): 7.5
Ingredients: surfactants, perfume, preservative, water
Specific References