WISCHPOL

Care product for floor wiping. Slip resistant. Suitable for sports floors. Complies with the DIN 18 032, paragraph 7.5 “Gleitsicherheit”.

Application areas

For all washable floor coverings like plastic, PVC, linoleum, Colovinyl, natural and artificial stone, rubber and epoxy resin.

wischpol is a product for versatile applications:

• economical wet mopping
• thorough spray cleaning
• automatic scrubber use.

Instructions for use

Wet mopping: Add 2 dl to 10 l water. Apply the solution with a wet mop, al-low acting briefly, remove the soiled solution and allow the floor to dry. Buffing increases the protective films shine and slip resistance.

Spray cleaning: Use undiluted.

Spot spray: Spray the product onto the spots and treat with a polish pad. Buff the cleaned surface areas shortly afterwards.

Full spray cleaning: Divide large surfaces in lanes of 2 - 2.5 m in width, spray the product evenly onto the lanes and treat the sprayed section with a single disc machine, then buff.

Automatic scrubbers: Add 2 dl to 10 l water.

Special advice

Not suitable for unsealed wood and cork floors.
The manufacturer declines all responsibility for damages from improper product use.

Technical data

Storage stability: at least 2 years
pH value (concentrated): 7
pH value (1% solution): 7
Ingredients: non-ionic surfactants, preservative, dye, perfume

 Article no. refers to the individual container. (Bottle, canister, bucket, can, barrel, cubitainer)