UNIPOL CITRO

General

Low-foaming cleanser for machine application with scrubbing suction machine or single disc machine in combination with a wet vacuum cleaner.
Best suitable also for manual application with mop or cloth.

Application areas

For all washable floor coverings like plastics, PVC, linoleum, hard concrete, terracotta slabs, clinker bricks, tiles, natural and synthetic stone, epoxy resin, rubber, Colovinyl, xylolite and asphalt.
For all washable surfaces and objects made of ceramics, enamel, plastics, chrome, chrome steel and for lacquered or painted surfaces.

Dosage

Add 0.5 - 2.0 dl to 10 l water (0.5 - 2%)

Instructions for use

Floors Apply solution. Scrub. Remove soiled solution with a wet vacuum cleaner or mop.
Walls, objects Wash with solution. Wipe with a well-wrung cloth.
Stubborn dirt Apply product directly to a cloth or pad. Treat locally. Use a squeegee for large surface areas.

Product consumption

10 l solution for 80 – 150 m2

Special advice

Wash walls from the bottom to the top to avoid water streaks / runs.
Test the colourfastness of painted surfaces and walls in an inconspicuous place before the application.
The manufacturer declines all responsibility for damages from improper product use.

Technical data

Storage stability   at least 2 years
pH value    concentrated: 10/ 1% solution: 7.5
Ingredients anionic and non-ionic surfactants, perfume, dye, preservative, water

 Article no. refers to the individual container. (Bottle, canister, bucket, can, barrel, cubitainer)