marbello

Best suitable for the treatment of calcareous stone floors like marble, travertine, Solnhofer and terrazzo.
The product seals the surface and provides a durable, tread-resistant high shine.
The floor is easy to maintain and dirt-repellent.

Application areas
The crystallisation with marbello is a modern alternative to traditional treatments (coating with dispersions or waxing) for marble, travertine, Solnhofer and terrazzo floors.
Versatile applications:
- sealing newly laid floors
- restoring floor shine, especially on floors which are matt due to high traffic
Advantages:
- easy application
- high, tread-resistant shine
- high resistance to traffic marks (surface improving)
- dust-repellence
- easy floor maintenance after treatment
- easy to restore

Dosage
use undiluted

Instructions for use
Primer treatment:
Spray 10 - 20g of marbello with a spray device equipped with a fine mist nozzle onto a surface of approximately 1m².
Using a single disc machine equipped with a steel wool pad, treat the sprayed area slowly with circular motions for approximately 5 minutes.
When the product has dried, continue treating the surface until the desired shine is achieved.
Remove pad rests with a vacuum cleaner.
Repairing traffic paths, renewing protection of worn-out areas:
Polishing the surface with a steel wool pad or a short follow-up treatment of the surface with marbello is often sufficient.
Routine maintenance:
Wet cleaning with an alcoholic cleanser.
Do not use aggressive cleansers.

Special advice
It is recommended to use a stainless steel wool pad or a red plastic pad to treat soft marble floors (rust spots!).
Exercise caution when treating floors with plastic grouting or travertine floors with plastic filling (grey film development!).
It is recommenced to use a red cleansing pad for the treatment of these floors.
The product is acidic, thus treat sprayed surface areas immediately to avoid spotting.
The manufacturer declines all responsibility for damages from improper product use.

Technical data
Storage stability: at least 2 years
pH value concentrated: 2
Ingredients: anionic and non-ionic surfactants, hexafluorosilicates, waxes 

Article no. refers to the individual container. (Bottle, canister, bucket, can, barrel, cubitainer)